IBM Power 9 Storage controller and drive bays

9009 EJ1D: Eighteen SFF-3 Bays/Dual IOA with Write Cache

EJ1D is IBM's Eighteen SFF-3 Bays/Dual IOA with Write Cache. Listed for 9009-41A, 9009-41G, 9009-42A and more.

An upgraded internal drive backplane with 18 drive bays and two caching RAID controllers for faster, safer internal storage.

EJ1D at a glance

DetailValue
Feature codeEJ1D
NameEighteen SFF-3 Bays/Dual IOA with Write Cache (IBM i page: 18 SFF-3 Bays/Dual IOA with Write Cache/Opt Ext SAS port)
Part typeStorage controller and drive bays
Bays18 SFF-3
Controllersdual IOA with write cache
External SAS portoptional
Internal adapterPCIe3 x8 cache SAS RAID internal adapter 6 Gb, CCIN 57D8
Listed for these Power 9 machine types9009-41A, 9009-41G, 9009-42A, 9009-42G, 9223-42H, 9223-42S
Runs with IBM iYes ... IBM i does not support the two adapters being owned by different partitions, and does not support Easy Tier.

Before you order EJ1D

The drive bay and controller setup decides how many drives the server can hold and how they are protected. Changing it usually means planning downtime, so check it against your machine type first.

Not sure which Power 9 you have? The Power 9 machine types page shows how to check. Collecting several parts for one quote? Use the Power 9 quote checklist. Or look up another feature code.

Source: IBM Docs: PCIe3 x8 cache SAS RAID internal adapter 6 Gb (FC EJ1D and EJ1M; CCIN 57D8); REDP-5497 section 2.6.3. Always confirm against your server's own configuration before you order.

Related

9009 ES8Q: 775GB SFF-3 SSD 4k eMLC4

ES8Q is IBM's 775GB SFF-3 SSD 4k eMLC4. Not listed for a Power 9 machine type.

9009 ES8P: 387GB SFF-3 SSD 4k eMLC4 for IBM i

ES8P is IBM's 387GB SFF-3 SSD 4k eMLC4 for IBM i. Not listed for a Power 9 machine type.

9009 EB2L: 900 W 100 - 127 V AC or 200 - 240 V AC power supply

EB2L is IBM's 900 W 100 - 127 V AC or 200 - 240 V AC power supply. Listed for 9009-41A, 9009-41G.

9009 ES8G: 1.55TB SFF-2 SSD 4k eMLC4 for IBM i

ES8G is IBM's 1.55TB SFF-2 SSD 4k eMLC4 for IBM i. Not listed for a Power 9 machine type.

Your 4 next moves with a Power 9

Every Power 9 owner lands on one of these. You can mix them, too. Keeping or upgrading buys time while you plan a replacement.

  1. Keep it running

    Your Power 9 does not stop working when IBM support ends. Third-party maintenance can cover parts and repairs, often for less than IBM charged.

    Best when the server is stable and you need one or two more years.

    Compare third-party maintenance

  2. You are reading about this move

    Upgrade the server you have

    More memory, bigger drives, or a faster network or Fibre Channel card can buy real time without a new server. Every part has an IBM feature code, so the upgrade starts there.

    Best when you are running out of room, not out of support.

    Browse Power 9 upgrades

  3. Buy a used or refurbished Power 9

    A matching used Power 9 makes a cheap spare, test box, or short bridge. Match the machine type first, because an A model and a G model carry different support dates.

    Best for a spare, a test system, or a stopgap of two years or less.

    Compare new, used, and refurbished

  4. Replace it with Power 10 or Power 11

    If you need IBM i 7.6, or want five or more years of IBM support, price a replacement. IBM i 7.6 does not run on any Power 9.

    Best when the server has to last past 2027 or the software needs a newer release.

    Compare Power 9 vs Power 11

Not sure which one fits? Answer four questions and get a starting point. Use the Power 9 Upgrade Matrix

Ready for prices? Compare IBM Power resellers, maintenance providers, and parts sources. Compare IBM Power resellers