IBM Power 9 Fibre Channel card

9009 EN1C: PCIe3 16Gb 4-port Fibre Channel Adapter, CCIN 578E)

EN1C is IBM's PCIe3 16Gb 4-port Fibre Channel Adapter, CCIN 578E). Listed for 9009-22A, 9009-41A, 9009-42A and more.

A four-port 16 Gb Fibre Channel card for SAN storage, in a full height card size.

EN1C at a glance

DetailValue
Feature codeEN1C
NamePCIe3 16Gb 4-port Fibre Channel Adapter (IBM Docs: PCIe3 x8 4-port Fibre Channel (16 Gb/s), CCIN 578E)
Part typeFibre Channel card
Ports4
Speed16 Gb (auto negotiates 4, 8, 16 Gbps)
PCIePCIe3 x8
Form factorfull height
Based onEmulex LPe31004 HBA (per IBM i page)
CCIN578E
Other height versionEN1D
Listed for these Power 9 machine types9009-22A, 9009-41A, 9009-42A, 9009-22G, 9009-41G, 9009-42G
Runs with IBM iYes ... IBM i native and VIOS configurations supported (IBM i 7.3 TR4, 7.2 TR8).

Before you order EN1C

Fibre Channel cards connect the server to a storage network (SAN) or tape. Low profile cards fit the shorter 2U servers. Full height cards fit the taller 4U servers. If a card has a twin code, the twin is the same card in the other height.

Not sure which Power 9 you have? The Power 9 machine types page shows how to check. Collecting several parts for one quote? Use the Power 9 quote checklist. Or look up another feature code.

Source: IBM Docs: PCIe3 x8 4-port Fibre Channel (16 Gb/s); (FC EL5W, EL5X, EN1C, and EN1D; CCIN 578E). Always confirm against your server's own configuration before you order.

Related

9009 ES8Q: 775GB SFF-3 SSD 4k eMLC4

ES8Q is IBM's 775GB SFF-3 SSD 4k eMLC4. Not listed for a Power 9 machine type.

9009 ES8P: 387GB SFF-3 SSD 4k eMLC4 for IBM i

ES8P is IBM's 387GB SFF-3 SSD 4k eMLC4 for IBM i. Not listed for a Power 9 machine type.

9009 EB2L: 900 W 100 - 127 V AC or 200 - 240 V AC power supply

EB2L is IBM's 900 W 100 - 127 V AC or 200 - 240 V AC power supply. Listed for 9009-41A, 9009-41G.

9009 ES8G: 1.55TB SFF-2 SSD 4k eMLC4 for IBM i

ES8G is IBM's 1.55TB SFF-2 SSD 4k eMLC4 for IBM i. Not listed for a Power 9 machine type.

Your 4 next moves with a Power 9

Every Power 9 owner lands on one of these. You can mix them, too. Keeping or upgrading buys time while you plan a replacement.

  1. Keep it running

    Your Power 9 does not stop working when IBM support ends. Third-party maintenance can cover parts and repairs, often for less than IBM charged.

    Best when the server is stable and you need one or two more years.

    Compare third-party maintenance

  2. You are reading about this move

    Upgrade the server you have

    More memory, bigger drives, or a faster network or Fibre Channel card can buy real time without a new server. Every part has an IBM feature code, so the upgrade starts there.

    Best when you are running out of room, not out of support.

    Browse Power 9 upgrades

  3. Buy a used or refurbished Power 9

    A matching used Power 9 makes a cheap spare, test box, or short bridge. Match the machine type first, because an A model and a G model carry different support dates.

    Best for a spare, a test system, or a stopgap of two years or less.

    Compare new, used, and refurbished

  4. Replace it with Power 10 or Power 11

    If you need IBM i 7.6, or want five or more years of IBM support, price a replacement. IBM i 7.6 does not run on any Power 9.

    Best when the server has to last past 2027 or the software needs a newer release.

    Compare Power 9 vs Power 11

Not sure which one fits? Answer four questions and get a starting point. Use the Power 9 Upgrade Matrix

Ready for prices? Compare IBM Power resellers, maintenance providers, and parts sources. Compare IBM Power resellers